Joker Bug 800w HMI

Category:
Joker Bug 800w HMI
Manufacturer: K5600
Website (Commercial/Pro): K5600 Commercial Website
Product ID: MP11058
Product Overview:


When K5600, Inc. introduced this unique wattage to the market in 1999, we expected it to be a welcomed change…But never did we expect it to become our # 1 seller and discontinue our own 1200! A JOKER-BUG 800 owner obviously understands the enormous advantages of this unique fixture.

MORE OUTPUT
Because of the increasing use of Chimera® Lightbanks for fine daylight interiors, two camera interviews, TV magazines, and documentaries, we designed this fixture to take full advantage of the large reflective material inside a Lightbank. Utilizing our BUG™ “bare-bulb” design we can produce an amazing 50% more output than a JOKER 1200!

READY TO FLY
The JOKER-BUG 800 fits in one tiny airline case, weighing only 38lbs. The next wattage up (1200) is twice the size and weight. The actual size of the kit is exactly the same as a JOKER-BUG 400 Kit!

LOCATION FRIENDLY
When working in practical locations such as homes, offices or business, power consumption is a key factor. The JOKER-BUG 800 will produce as much output as a 4,000 Watt quartz fixture with the power draw of only 11 Amps, never risk overloading a circuit again! The next size up (1200) monopolizes an entire circuit whereas the JOKER-BUG 800 will allow for another source such as a JOKER-BUG 400 on the same circuit!

THE BOTTOM LINE:

Less is More – JOKER-BUG 800 puts out 50% more light than a 1200 in a Chimera®.

Less is More – JOKER-BUG 800 is smaller than its nearest lower wattage (575). And fits in the same case as a JOKER 400!

Less is More – JOKER-BUG 800 only draws 11 Amps allowing for a 400W to be used on the same circuit!

Lamp Housing: Aluminum casting, high temperature black. Striker compartment is made of aluminum in light gray finish.

Lamp Socket: G22, highly insulated for hot restrike.

Safety Glass Beaker: Borosilicate tempered.

Yoke: Aluminum casting black high temperature finish. Large T-handle and large brake area for use with Lightbanks, Speed Rings, Louvers and Lanterns.

BEAMER Housing: 
Solid one piece machined aluminum with replaceable ears. Black anodized.

BEAMER Reflector: 7″ diameter specular parabolic, aluminum 90 percent reflectance electrolytically coated.

Accessory Size: 7 3/4″

Mounting/Grip Equipment:
 All standard 5/8″ baby hardware.

Lamp: 800 Watt MSR/SE daylight single ended discharge. Special UV-Stop envelope. 600 hours maximum life.

Connectors:
 Veam quarter-turn quick locking.

Extension Cable: 25 foot shielded. Common to 200/400 and 800 (nine feet attached to the head).

Power Supply: Electronic, square wave flicker free. AC input: 90V to 132V or by sliding selector switch: 180-265V, 50 or 60Hz. On/Off push button switch. Completely silent (convection cooled).

Reviews

There are no reviews yet.

Be the first to review “Joker Bug 800w HMI”

Your email address will not be published. Required fields are marked *